Price Compressor Co., Inc.
The Acknowledged Leader in Special Application Packaged Compressors
7752 Braniff Street • Houston, TX 77061
PH. (713) 649-6050 • FAX (713) 649-5527
e-mail: pricecompressor@aol.com

MODEL A-35 WC
BASIC SPECIFICATIONS

PHYSICAL AND DIMENSIONAL DATA
LENGTH: 

96" [2439 mm]
WIDTH:

72" [1829 mm]
HEIGHT:

88" [2235 mm]
WEIGHT:

7700 POUNDS [3496 Kg]
OIL CAPACITY:

17 GALLONS [65 Liters]
• Six (6) Cylinder "W" Configuration - 5" stroke
• Horsepower at 615 RPM - 3500 PSIG is 72 HP
• Capable of up to 120 SCFM [3.4 M3M] discharge flowrate
• Maximum RPM 840
• Normal RPM 615

STAGES:
STAGE CYLINDERS BORE DISCHARGE PRESSURE
First Two 7" [178 mm] 45 PSI [310 K pa]
Second Two 4" [102 mm] 220 PSI [1516 K pa]
Third One 2 1/2" [64 mm] 890 PSI [6132 K pa]
Fourth One 1 1/2" [38 mm] 3500 PSI [24,115 K pa]
Capable of discharge pressures to 4250 PSI [29,283 K pa] with minor modifications

COMPRESSOR
• Water cooled 1st and 2nd stage cylinder - water cooled intercooler and after cooler.
• Final air temperature: 20 deg. F. [-6.7º C.] above inlet coolant liquid temperature.
• Cooling requires 30 gallons [114 Liters] of raw water per minute (customer supplied).

AIR DRYER:
• Regenerating twin tower w/pre & after filter, - 40 deg. F. rated dewpoint.
• Max. operating pressure: 200 PSI at 2500 PSI discharge
                                          225 PSI at 3500 PSI discharge
• Controls: Electric, 110 - 130 VAC
• Dessicant: Activated Alumina

ELECTRIC STARTER AND NEMA 4 CONTROL ENCLOSURE

MOTOR:
75 Horsepower [56 Kw], 365T Frame, TEFC, 230/460 VAC, 3 phase, 1750 RPM

SAFETY SHUTDOWNS AND CONTROLS
• Low oil pressure lockout
• High temperature lockout
• High discharge air pressure lockout
• Electric motor overload lockout
• Electric timed pneumatic moisture drains
• Automatic and manual on/off operation

CLOSED LOOP COOLANT PUMP
1.5 Horsepower, TEFC, 230/460 VAC, 3 phase, 60 cycle, 1750 RPM

PREVIOUS      MODEL SELECTION PAGE      NEXT